Kia Sedona: Side Impact Sensor (SIS) Components and Components Location

Third generation YP (2014-2026) / Kia Sedona YP Service Manual / Restraint / SRSCM / Side Impact Sensor (SIS) Components and Components Location

Side Impact Sensor (SIS) Description and Operation

Description Side Impact Sensor (SIS) system consists of two Pressure Side Impact Sensors (P-SIS), installed at each center of front door modules (LH and RH), two SIS, installed at each center o ...

Side Impact Sensor (SIS) Repair procedures

Removal Pressure Side Impact Sensor (P-SIS)     • Removal of the airbag must be performed according to the precautions/procedures described previously. • ...

Other Information:

Blower Resistor (Manual) Repair procedures
Inspection 1. Measure the resistance between the terminals. 2. If the measured resistance is not within specification, the blower resistor must be replaced (after removing the resistor). Repl ...

Hands free switch Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the driver airbag module. (Refer to Restraint - "Driver Airbag (DAB) Module and Clock Spring") 3. Remove the steering wh ...