Specification |
Item | Specification | |
Compressor | Type | 7VSX16 (External Variable Displacement Swash Plate) |
Oil type & Capacity | PAG (FD46XG) 210 ± 10cc (7.4 ± 0.35oz.) | |
Pulley type | 6PK-TYPE | |
Displacement | 180cc/rev | |
Condenser | Heat rejection | 20,000 Min. kcal/h |
Expansion valve | Type | Block type |
Refrigerant | Type | HFC-134a |
Capacity | 1100 ± 25g (38.8 ± 0.88oz.) |
Item | Specification | |
Fresh and recirculation | Operating method | Actuator |
Blower | Type | Sirocco |
Speed step | Auto + 8 speed (Automatic), 1~4speed (Manual) | |
Speed control | Power mosfet (Automatic), Resistor (Manual) | |
Air filter | Type | Particle filter |
Item | Specification | ||
Heater | Type | Pin & Tube type | |
Heating capacity | Front | 4,800 - 5% kcal/hr | |
Rear | 4,400 - 5% kcal/hr | ||
Mode operating method | Actuator | ||
Temperature operating method | Actuator | ||
Evaporator | Temperature control type | Evaporator temperature sensor | |
A/C ON/OFF | ON : 2.1°C (35.8°F) OFF: 0.6°C (33.1°F) |
Tightening Torques |
Items | N.m | kgf.m | lb-ft | |
Compressor | Mounting bolt | 20.0 ~ 32.95 | 2.04 ~ 3.36 | 14.75 ~ 24.30 |
Limiter bolt | 5.0 ~ 7.0 | 0.51 ~ 0.71 | 3.7 ~ 5.1 | |
Clutch bolt | 9.8 ~ 14.7 | 1.0 ~ 1.5 | 7.2 ~ 10.8 | |
Discharge hose - bolt | 7.8 ~ 11.8 | 0.8 ~ 1.2 | 5.8 ~ 8.7 | |
Discharge pipe - bolt | ||||
Suction hose - bolt | ||||
Liquid tube & hose - bolt | ||||
Discharge hose - nut | 6.9 ~ 10.8 | 0.7 ~ 1.1 | 5.1 ~ 8.0 | |
Discharge pipe - nut | ||||
Suction hose - nut | ||||
Liquid tube & hose - nut |
Troubleshooting
Troubleshooting
Limp Home Mode
Features a fail-safe function that prevents dangerous
situations in the event of a transaxle failure.The vehicle will be
driven in limp home mode if the transa ...
Troubleshooting
Engine Overheat Troubleshooting
Inspection RemedyVisual inspectionInspect for shortage of coolant in reservoir tank .Reinspect after replenishing coolant.Inspect for coolant pollution after remo ...