Kia Sedona: SRS components and functions
The SRS consists of the following components :
(1) Driver's front air bag module
(2) Passenger's front air bag module
(3) Side air bag modules
(4) Curtain air bag modules
(5) Retractor pre-tensioner assemblies
(6) Air bag warning light
(7) SRS control module (SRSCM)/ Rollover sensor
(8) Front impact sensors
(9) Side impact sensors
(10) PASSENGER
Air bag warning light
The purpose of air bag warning light in your instrument panel is to alert you
of a potential problem with your air bag system, which could include your side and/or
curtain air bags used for roll ...
Occupant Detection System(ODS)
Type A
Type B
Your vehicle is equipped with an occupant detection system in the front passenger's
seat.
The occupant detection system is designed to detect the presence of a properly-seat ...
Other Information:
Idler Repair procedures
Removal and Installation
1.
Remove the drive belt.
(Refer to Timing System - "Drive Belt")
2.
Remove the drive belt idler (A).
Tightening torque :
53.9 ~ 57.9 N.m (5.5 ~ 5.9 kgf.m, 39.8 ...
ESC Control Module Components and Components Location
Components
1. Front - left tube2. Rear - right tube3. Rear - left tube4. Front - right tube5. MC26. MC17. ESC control module (HECU)8. Bracket
...
Categories
- Home
- First Generation
- Second Generation
- Third generation
- Kia Sedona YP 2014-2024 Owners Manual
- Kia Sedona YP 2014-2024 Service Manual