Kia Sedona: Sunvisor Repair procedures - Roof Trim - Body (Interior and Exterior) - Kia Sedona YP Service ManualKia Sedona: Sunvisor Repair procedures

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Body (Interior and Exterior) / Roof Trim / Sunvisor Repair procedures

Replacement
   
Put on gloves to protect your hands.
   
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
Take care not to bend or scratch the trim and panels.
1.
Loosen the mounting screw and remove the retainer (A).

2.
Remove the sunvisor mounting cover (A) and loosen the screw.

3.
Disconnect the sunvisor connector (A) and remove the sunvisor (B).

4.
Install in the reverse order of removal.
   
Replace any damaged clips.
Sunvisor Components and Components Location
Component Location 1. Sunvisor2. Retainer ...

Assist Handle Components and Components Location
Component Location 1. Assist handle ...

Other Information:

Air bag collision sensors
(1) SRS control module/ Rollover sensor (2) Front impact sensor (3) Side impact sensor (4) Side pressure sensor WARNING - Air bag sensors Do not hit or allow any objects to impact the lo ...

Fuel Sender Repair procedures
Removal 1. Remove the fuel pump. (Refer to Fuel Delivery System - “Fuel Pump”) 2. Disconnect the fuel sender connector (A). 3. Lift the fixing hook (B) by using a common driver, and ...

Categories


Copyright © www.kisedona.com 2016-2024