Description
•
The sensor used is a thermistor (NTC) in which resistance changes with temperature variation.
•
The TCM supplies about 5 voltage to the sensor; the output value ...
Inspection
1.
Turn ignition switch OFF.
2.
Remove the battery and battery tray.
(Refer to Engine Electrical System - "Battery")
3.
Disconnect the solenoid valve connector (A).
4.
Me ...
Other Information:
Height Adjust Repair procedures
Replacement
1.
Remove the center piller upper trim.
(Refer to Interior Trim - "Center Piller Trim")
2.
After loosening the mounting bolts, remove the height adjust (A).
Tightening torque ...