Kia Sedona: Variable Intake Solenoid (VIS) Valve Specifications - Engine Control System - Engine Control / Fuel System - Kia Sedona YP Service ManualKia Sedona: Variable Intake Solenoid (VIS) Valve Specifications

Third generation YP (2014-2025) / Kia Sedona YP Service Manual / Engine Control / Fuel System / Engine Control System / Variable Intake Solenoid (VIS) Valve Specifications

Specification
Item
Specification
Coil Resistance (Ω)
30.0 ~ 35.0 [20°C(68°F)]

CVVT Oil Control Valve (OCV) Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the OCV connector. 3. Measure resistance between the OCV terminals 1 and 2. 4. Check that the resistance is within the specifi ...

Variable Intake Solenoid (VIS) Valve Description and Operation
Description Variable Intake manifold Solenoid (VIS) valves are installed on the intake manifold (VIS Valve 1) and the surge tank (VIS Valve 2). VIS valves 1 and 2 control vacuum modulators that ...

Other Information:

General Information
General Service Information Protection Of The Vehicle Always be sure to cover fenders, seats, and floor areas before starting work.     The support rod must be inserted i ...

To increase cruise control set speed
Follow either of these procedures: Move the lever up (to RES+), and hold it. Your vehicle set speed will increase by 10 km/h (5 mph). Release the lever at the speed you want. Move the lever ...

Categories


Copyright © www.kisedona.com 2016-2025