Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the rear console cover.
(Refer to Body - "Rear Console Cover") |
3. |
Remove the floor console tray (A) after loosening the screws. |
4. |
Remove the rear console switch panel (A) after loosening the screws. |
5. |
Remove the AC inverter outlet switch (A) after pushing the mounting hooks. |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the power outlet cover (A) from the right luggage side trim. |
3. |
Disconnect the power outlet connector (B) and AC inverter outlet connector (C). |
4. |
Remove the AC inverter outlet switch (B) from the power outlet cover (A). |
Installation |
1. |
Install the AC inverter outlet switch. |
2. |
Install the rear console switch panel. |
3. |
Install the floor console tray. |
4. |
Install the rear console cover. |
5. |
Connect the negative (-) battery terminal. |
1. |
Install the AC inverter outlet switch. |
2. |
Connect the power outlet connector and AC inverter outlet connector. |
3. |
Install the power outlet cover . |
4. |
Connect the negative (-) battery terminal. |
Side Airbag (SAB) Module Description and Operation
Description
The Side Airbags (SAB) are installed inside the front seat to
protect the driver and front passenger from danger when side crash
occurs. The SRSCM determines deployment of side airb ...
Passenger Airbag (PAB) Module Description and Operation
Description
Passenger Airbag (PAB) module is located in the passenger
crash pad. The PAB contains 2 firing squibs of airbag and 1 firing squib
of active vent. The deployment timing of both 2 fi ...