Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad Lower Panel") |
3. |
Remove the crash pad lower switch (A) after loosening the screws. |
4. |
Disconnect the crash lower switch connector (A). |
Installation |
1. |
Connect the crash pad lower switch connector. |
2. |
Install the crash pad lower switch. |
3. |
Install the crash pad lower panel. |
4. |
Connect the negative (-) battery terminal. |
Filler-Neck Assembly Repair procedures
Removal
1.
Open the fuel filler door and then remove the filler-neck mounting bolts (A).
Filler-neck assembly mounting bolt:
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)
2.
Left the ...
Lane Departure Warning System (LDWS) Unit Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the LDWS unit cover (A).
3.
Disconnect the LDWS unit connector (A).
4.
Remove the LDWS unit after disengaging the mou ...