Inspection |
1. |
Remove the air cleaner element. |
2. |
Check that the air filter is excessively dirty.
If the air filter is excessively dirty, replace the air cleaner element. |
3. |
If the air cleaner element needs to be cleaned, blow compressed air as shown in the illustration to clean it.
|
4. |
Reinstall the air cleaner element. |
Replacement |
1. |
Open the air cleaner element cover (A) by lifting up the air cleaner element cover handle (B). |
2. |
Unlock the air cleaner element camshaft (A) by turning in the direction of arrow. |
3. |
Replace the air cleaner element (A) with a new one.
|
4. |
Lock the air cleaner element camshaft and then close the air cleaner element cover. |
Auto Defogging Sensor (DATC only) Repair procedures
Inspection
To inspect and diagnose the sensor, refer to Self-Diagnosis procedure and DTC guide.
Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the auto defogging se ...
Front Seat Shield Inner Cover Repair procedures
Replacement
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related parts, to
prevent damage. ...