Kia Sedona: Aluminum wheel maintenance
The aluminum wheels are coated with a clear protective finish.
- Do not use any abrasive cleaner, polishing compound, solvent, or wire brushes
on aluminum wheels. They may scratch the finish.
- Clean the wheel when it has cooled.
- Use only a mild soap or neutral detergent, and rinse thoroughly with water.
Also, be sure to clean the wheels after driving on salted roads. This helps
prevent corrosion.
- Avoid washing the wheels with highspeed vehicle wash brushes.
- Do not use any alkaline or acid detergents It may damage and corrode the
aluminum wheels coated with a clear protective finish.
Corrosive materials used for ice and snow removal and dust control may collect
on the underbody. If these materials are not removed, accelerated rusting can occur
on underbody parts such as the fu ...
Protecting your vehicle from corrosion
By using the most advanced design and construction practices to combat corrosion,
we produce vehicles of the highest quality. However, this is only part of th ...
Other Information:
BJ Boot Repair procedures
Removal
1.
Remove the front driveshaft.
(Refer to Driveshaft Assembly - “Front Driveshaft”)
2.
Remove the TJ joint assembly.
(Refer to Driveshaft Assembly - “TJ Joint”)
3.
Rem ...
Ignition Coil Description and Operation
Description
An ignition coil is an induction coil in an engine''s
ignition system which transforms the battery''s low voltage to the high
voltage needed to create an electric spark in the spark ...