Kia Sedona: Blind Spot Detection System - Body Electrical System - Kia Sedona YP Service ManualKia Sedona: Blind Spot Detection System

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Body Electrical System / Blind Spot Detection System

Repair procedures
Removal     Take care not to scratch the crash pad and related parts. 1. Disconnect the negative (-) battery terminal. 2. Remove the glove box housing. (Refer to B ...

Specifications
Specifications ItemsSpecificationRated voltageDC 12VOperating voltage9V ~ 16VOperating speed30km/h ~ 250km/hSensible distance70m (Sedan)Curvature radiusStart : More than 100mStop : Less than 70mF ...

Other Information:

Rear Pillar Trim Repair procedures
Replacement [Rear Pillar Trim]     • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, ...

Checking the power steering fluid level
With the vehicle on level ground, check the fluid level in the power steering reservoir periodically. The fluid should be between MAX and MIN marks on the side of the reservoir at the normal tem ...

Categories


Copyright В© www.kisedona.com 2016-2024