Kia Sedona: Troubleshooting - Blind Spot Detection System - Body Electrical System - Kia Sedona YP Service ManualKia Sedona: Troubleshooting

Third generation YP (2014-2025) / Kia Sedona YP Service Manual / Body Electrical System / Blind Spot Detection System / Troubleshooting

Troubleshooting
Examples of False-Alarm Occurrence from system characteristics (not considered as problem)
Characteristics of EM Wave : EM Waves are reflected against all materials and especially well against metals. Reflections of EM Waves varies with the shape of object. (※ EM : Electro Magnetic)
Radar Sensor : Radar Sensor sense the car by 24GHz echo signal.
Special environment may cause ''False-Alarm'' occurrence due to EM waves.

Blind Spot Detection Indicator Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the mirror (A) from the mirror holder.     Be careful not to damage the fixing clips (A). 3. ...

Button Engine Start System
...

Other Information:

Rear Coil Spring Repair procedures
Removal 1. Remove the rear wheel and tire (A) from rear hub. Tightening torque : 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)     Be careful not to damage ...

Front Driveshaft Components and Components Location
Components 1. Front driveshaft (LH)2. Inner shaft bearing bracket3. Front driveshaft (RH) [LH] 1. BJ assembly2. Clip 3. BJ boot band4. BJ boot5. Dynamic damper band6. Dynamic damper7. Sha ...

Categories

Copyright © www.kisedona.com 2016-2025