Kia Sedona: Crankshaft Position Sensor (CKPS) Troubleshooting

Third generation YP (2014-2025) / Kia Sedona YP Service Manual / Engine Control / Fuel System / Engine Control System / Crankshaft Position Sensor (CKPS) Troubleshooting

Crankshaft Position Sensor (CKPS) Repair procedures

Inspection 1. Check the signal waveform of the CMPS and CKPS using the GDS. Specification: Refer to “Wave Form” Removal 1. Turn the ignition switch OFF and disconnect the battery n ...

Camshaft Position Sensor (CMPS) Specifications

Specification ItemSpecification (V) [Ref=5V]Output Voltage (V)High: 5.0VLow: 0.7V ...

Other Information:

Surge Tank Repair procedures
Removal and Installation 1. Remove the engine cover. (Refer to Engine and Transaxle Assembly - "Engine Cover") 2. Remove the air duct. (Refer to Intake And Exhaust System - "Air Cleaner") ...

Timing Chain Repair procedures
Removal 1. Set No.1 cylinder to TDC/compression. (1) Turn the crankshaft pulley clockwise and align its groove with the timing mark "T" of the lower timing chain cover. (2) Check that the m ...