Kia Sedona: Electronic stability control (ESC) - Brake system - Driving your vehicle - Kia Sedona YP Owners ManualKia Sedona: Electronic stability control (ESC)

Third generation YP (2014-2024) / Kia Sedona YP Owners Manual / Driving your vehicle / Brake system / Electronic stability control (ESC)

The Electronic Stability control (ESC) system is designed to stabilize the vehicle during cornering maneuvers. ESC checks where you are steering and where the vehicle is actually going. ESC applies the brakes on individual wheels and intervenes with the engine management system to stabilize the vehicle.

Electronic stability control (ESC) will not prevent accidents. Excessive speed in turns, abrupt maneuvers and hydroplaning on wet surfaces can still result in serious accidents. Only a safe and attentive driver can prevent accidents by avoiding maneuvers that cause the vehicle to lose traction. Even with ESC installed, always follow all the normal precautions for driving - including driving at safe speeds for the conditions.

The Electronic Stability Control (ESC) system is an electronic system designed to help the driver maintain vehicle control under adverse conditions. It is not a substitute for safe driving practices. Factors including speed, road conditions and driver steering input can all affect whether ESC will be effective in preventing a loss of control. It is still your responsibility to drive and corner at reasonable speeds and to leave a sufficient margin of safety.

When you apply your brakes under conditions which may lock the wheels, you may hear a

Anti-lock brake system (ABS)
ABS (or ESC) will not prevent accidents due to improper or dangerous driving maneuvers. Even though vehicle control is improved during emergency braking, always maintain a safe distance between yo ...

ESC operation
ESC ON condition When the ignition is turned ON, ESC and ESC OFF indicator lights illuminate for approximately 3 seconds, then ESC is turned on. Press the ESC OFF button for at least half a ...

Other Information:

Sunroof Glass Repair procedures
Replacement [Front] 1. Completely open the sunroof glass (A) by pressing the sunroof switch. 2. Remove the sunroof deflector. (Refer to sunroof - "Sunroof Deflector ") 3. Loosen the sc ...

Curtain Airbag (CAB) Module Repair procedures
Removal 1. Disconnect the battery negative cable and wait for at least 30 seconds before beginning to work. 2. Remove the roof trim. (Refer to Body - "Roof trim assembly") 3. Disconnect ...

Categories


Copyright В© www.kisedona.com 2016-2024