Kia Sedona: Engine Coolant Temperature Sensor (ECTS) Specifications - Engine Control System - Engine Control / Fuel System - Kia Sedona YP Service ManualKia Sedona: Engine Coolant Temperature Sensor (ECTS) Specifications

Third generation YP (2014-2025) / Kia Sedona YP Service Manual / Engine Control / Fuel System / Engine Control System / Engine Coolant Temperature Sensor (ECTS) Specifications

Specification
Temperature
Resistance (kΩ)
°C
°F
-40
-40
48.14
-20
-4
14.13 ~ 16.83
0
32
5.79
20
68
2.31 ~ 2.59
40
104
1.15
60
140
0.59
80
176
0.32

Intake Air Temperature Sensor (IATS) Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the IATS connector. 3. Measure resistance between the IATS terminals 3 and 4. 4. Check that the resistance is within the speci ...

Engine Coolant Temperature Sensor (ECTS) Description and Operation
Description Located in the engine coolant passage of the cylinder, the Engine Coolant Temperature Sensor (ECTS) is used to detect the engine coolant temperature. The ECTS uses a thermistor whos ...

Other Information:

Description and Operation
Description Block Diagram LDWS is composed of below units NoItemFunctionPosition1LDWS UNIT 1) Lane Departure Warning System (LDWS) : Detects drive lane in front and engages warning function ...

Reservoir Tank Repair procedures
Removal and Installation 1. Disconnect the over flow hose (A), and then drain the coolant from the reservoir tank. 2. Remove the reservoir tank (B). Tightening torque : 7.8 ~ 11.8 N.m (0.8 ...

Categories


Copyright © www.kisedona.com 2016-2025