Kia Sedona: Overdrive Clutch Control Solenoid Valve(OD/C_VFS) Specifications - Automatic Transaxle Control System - Automatic Transaxle System - Kia Sedona YP Service ManualKia Sedona: Overdrive Clutch Control Solenoid Valve(OD/C_VFS) Specifications

Third generation YP (2014-2025) / Kia Sedona YP Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Overdrive Clutch Control Solenoid Valve(OD/C_VFS) Specifications

Specification
Item
Specification
Control type
N/H (Normal High)
Control pressure kpa (kgf/cm², psi)
"500.14 ~ 9.81 (5.1 ~ 0.1, 72.54 ~ 1.42)"
Current value (mA)
50 ~ 850
Coil resistance(Ω)
5.1 ± 0.3

Underdrive Brake Control Solenoid Valve(UD/B_VFS) Repair procedures
Inspection 1. Turn ignition switch OFF. 2. Remove the battery and battery tray. (Refer to Engine Electrical System - "Battery") 3. Disconnect the solenoid valve connector (A). 4. Me ...

Overdrive Clutch Control Solenoid Valve(OD/C_VFS) Components and Components Location
Component Location 1. Overdrive clutch control solenoid valve (OD/C_VFS) ...

Other Information:

Blower Motor Repair procedures
Inspection 1. Connect the battery voltage and check the blower motor rotation. 2. If the blower motor does not operate well, substitute with a known-good blower motor and check for proper oper ...

Rear Sub Frame Repair procedures
Removal 1. Remove the rear wheel and tire (A) from rear hub. Tightening torque: 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)     Be careful not to damage ...

Categories


Copyright © www.kisedona.com 2016-2025