Kia Optima Manuals

Kia Sedona: Rear Transverse Trim Repair procedures - Interior Trim - Body (Interior and Exterior) - Kia Sedona YP Service ManualKia Sedona: Rear Transverse Trim Repair procedures

Third generation YP (2014-2025) / Kia Sedona YP Service Manual / Body (Interior and Exterior) / Interior Trim / Rear Transverse Trim Repair procedures

Replacement
   
•
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
•
Put on gloves to protect your hands.
   
Take care not to bend or scratch the trim and panels.
1.
Remove the tailgate weatherstrip.
(Refer to Tailgate - " Tailgate Weatherstrip")
2.
Remove the rear luggage board (A).

3.
Remove the rear transverse trim (A) after loosening the mounting screws.

4.
Install in the reverse order of removal.
   
Replace any damaged clips.
Rear Transverse Trim Components and Components Location
Component Location 1. Rear transverse trim ...

Luggage Side Trim Components and Components Location
Component Location 1. Luggage side trim ...

Other Information:

Compressor Components and Components Location
Components 1. Clutch Bolt2. Limiter Bolt3. Limiter & Hub Assembly4. Snap Ring5. Pulley6. Compressor Assembly ...

Barometric Pressure Sensor (BPS) Repair procedures
Inspection 1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the BPS at idle and IG ON. Pressure [kPa (kgf/cm², psi)]Output Voltage (V) [Ref=5V]10.0 (0. ...

Categories


Copyright © www.kisedona.com 2016-2025