Kia Sedona: Rear Bumper beam Assembly Components and Components Location

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Body (Interior and Exterior) / Rear Bumper / Rear Bumper beam Assembly Components and Components Location

Rear Bumper Cover Repair procedures

Replacement     • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. ...

Rear Bumper beam Assembly Repair procedures

Replacement     • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. ...

Other Information:

Ignition Coil Repair procedures
Removal Ignition coil (Cylinder #1) [Bank 1] 1. Remove the surge tank. (Refer to Engine Mechanical System - "Surge Tank") 2. Disconnect the Ignition coil connector (A). 3. Remove the i ...

Range (1)
The range is the estimated distance the vehicle can be driven with the remaining fuel. - Distance range : 1 ~ 9,999 km. or 1 ~ 9,999 mi If the estimated distance is below 1km (1mi.), the tri ...