Kia Sedona: Front Seat Shield Inner Cover Repair procedures

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Body (Interior and Exterior) / Front Seat / Front Seat Shield Inner Cover Repair procedures

Replacement

•	When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.

•	Put on gloves to protect your hands.

1.	Remove the front seat assembly. (Refer to Front Seat - "Front Seat Assembly")

2.	After loosening the mounting screw, remove the front seat shield inner cover (A).

Install in the reverse order of removal.

Replace any damaged clips.

Front Seat Shield Inner Cover Components and Components Location

Component Location 1. Front seat shield inner cover ...

Front Seat Back Cover Components and Components Location

Component Location 1. Front seat back cover ...

Other Information:

License plate light bulb replacement
1. Loosen the lens retaining screws with a phillips head screwdriver. 2. Remove the lens. 3. Remove the bulb by pulling it straight out. 4. Install a new bulb. 5. Reinstall the lens securely wit ...

Heated Oxygen Sensor (HO2S) Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the HO2S connector. 3. Measure resistance between the HO2S terminals 3 and 4. 4. Check that the resistance is within the speci ...

Kia Sedona: Front Seat Shield Inner Cover Repair procedures

Front Seat Shield Inner Cover Components and Components Location

Front Seat Back Cover Components and Components Location

Other Information:

Categories