Replacement
[Second row seat assembly]
[7Seat/8Seat]
1.
Loosen the second row seat front mounting bolts (A) after opening the cap (B).
2.
Pull up the seat by pulling the stand-up lever.
...
Other Information:
Injector Drive Box (IDB) Repair procedures
Removal
1.
Turn the ignition switch off and disconnect the battery negative (-) Terminal.
2.
Remove the mounting nuts (A) and disconnect the connector (B), and then remove the injector drive b ...
Drive Belt Repair procedures
Removal and Installation
1.
Remove the engine room under cover and engine room RH side cover.
(Refer to Engine And Transaxle Assembly - "Engine Room Under Cover")
2.
To release the tension, t ...