Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad Lower Panel") |
3. |
Remove the crash pad lower switch (A) after loosening the screws. |
4. |
Disconnect the crash lower switch connector (A). |
Installation |
1. |
Connect the crash pad lower switch connector. |
2. |
Install the crash pad lower switch. |
3. |
Install the crash pad lower panel. |
4. |
Connect the negative (-) battery terminal. |
Spark Plug Repair procedures
Inspection
[On vehicle inspection]
1.
Accelerate the engine to about 3,000 rpm 3 times or more.
2.
Remove the spark plug.
3.
Check the spark plug visually.
If the electrode is dry, the ...
Front Oil Seal Repair procedures
Replacement
1.
Remove the crankshaft damper pulley.
(Refer to Timing System - "Crankshaft Damper Pulley")
2.
Remove the front oil seal (A).
3.
Using SST (09231-3C100), install a new fron ...