Kia Sedona: Specifications - AVN System - Body Electrical System - Kia Sedona YP Service ManualKia Sedona: Specifications

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Body Electrical System / AVN System / Specifications

Specifications
AVN Head Unit
Item
Specification
Power supply
DC 14.4V Negative ground
Tuning type
PLL SYNTHESIZED TUNING
Load impedance
2Ω x 4 (Front/Rear/Woofer)
4Ω x 2 (Tweeter)
Antenna
80PF 75Ω
Dark current
Max. 4.0mA (Head unit only)
Frequency range /
Channel space
FM
87.5~107.9 MHz / 200 kHz
AM
530~1,710 kHz / 10 kHz
S/N
FM
MIN 50 dB
AM
MIN 45 dB

Speaker
Item
Specification
Input Power
Front
25W (Max 50W)
Rear
25W (Max 50W)
Center
25W (Max 50W)
Front tweeter
13W (Max 25W)
Sub woofer
100W (Max 50W x 2)
Speaker Impedance
Front
2.0 ± 0.3 Ω
Rear
2.0 ± 0.3 Ω
Center
2.0 ± 0.3 Ω
Front tweeter
3.2 Ω
Sub woofer
5.0 ± 0.8 Ω
Number of speakers
8

AVN System
...

Components and Components Location
Component Location 1. AVN head unit2. Tweeter speaker3. Center speaker4. Roof antenna5. Front speaker6. Rear speaker7. Sub woofer speaker8. Antenna feeder cable9. Antenna cable connector10. Exter ...

Other Information:

Compressor oil Repair procedures
Oil Specification 1. The HFC-134a system requires synthetic (PAG) compressor oil whereas the R-12 system requires mineral compressor oil. The two oils must never be mixed. 2. Compressor (P ...

Front Wiper Motor Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. If necessary, release the wiper blade fixing clip by pulling up and remove the wiper blade from the inside radius of wiper arm. 3 ...

Categories


Copyright © www.kisedona.com 2016-2024