Kia Sedona: Components and Components Location - Power Sliding Door System - Body Electrical System - Kia Sedona YP Service ManualKia Sedona: Components and Components Location

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Body Electrical System / Power Sliding Door System / Components and Components Location

Components

1 Overhead console switch
2 Power Sliding Door trim switch
3 Inside/outside door handle switch
4 Latch (detent switch & primary switch included)
5 Power Sliding Door drive unit
6 Power Sliding Door module

Description and Operation
Description Power Sliding Door is a system which can open/close the door automatically by using a switch located on overhead console and rear seat trim, internal/outer handle of a sliding door ...

Troubleshooting
Failure Check-up Elements The following is to be checked before inspecting the Power Sliding Door system parts. 1. Manual operation Check if the sliding door operates manually. Shift to ''OFF'' ...

Other Information:

Certification label
The certification label is located on the driver's door sill at the center pillar. This label shows the maximum allowable weight of the fully loaded vehicle. This is called the GVWR (Gross Vehi ...

Engine Coolant Temperature Sensor (ECTS) Description and Operation
Description Located in the engine coolant passage of the cylinder, the Engine Coolant Temperature Sensor (ECTS) is used to detect the engine coolant temperature. The ECTS uses a thermistor whos ...

Categories


Copyright В© www.kisedona.com 2016-2024