The certification label is located on the driver's door sill at the center pillar.
This label shows the maximum allowable weight of the fully loaded vehicle. This is called the GVWR (Gross Vehicle Weight Rating). The GVWR includes the weight of the vehicle, all occupants, fuel and cargo.
This label also tells you the maximum weight that can be supported by the front and rear axles, called Gross Axle Weight Rating (GAWR). To find out the actual loads on your front and rear axles, you need to go to a weigh station and weigh your vehicle.Your dealer can help you with this. Be sure to spread out your load equally on both sides of the centerline.
WARNING - Over loading
Never exceed the GVWR for your vehicle, the GAWR for either the front or rear
axle and vehicle capacity weight. Exceeding these ratings can affect your vehicle Rear Transverse Trim Repair procedures Rear Center Seat Belt Retractor Components and Components Location
The label located on the driver's door sill gives the original tire size, cold
tire pressures recommended for your vehicle, the number of people that can be in
your vehicle and veh ...
Tire and loading information label
This section will guide you in the proper loading of your vehicle and/or trailer,
to keep your loaded vehicle weight within its design rating capability, with or
without a trailer. Properly loadin ...
Vehicle weight glossary
Other Information:
Replacement
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related parts, to
prevent damage. ...
Component Location
1. Second row center seat belt retractor2. Third row center seat belt retractor
...