Kia Sedona: 96,000 km (60,000 miles) or 48 months - Normal maintenance schedule - Maintenance - Kia Sedona YP Owners ManualKia Sedona: 96,000 km (60,000 miles) or 48 months

Third generation YP (2014-2024) / Kia Sedona YP Owners Manual / Maintenance / Normal maintenance schedule / 96,000 km (60,000 miles) or 48 months

❑ Rotate tire
❑ Inspect battery condition
❑ Inspect vacuum hose
❑ Inspect air conditioning refrigerant
❑ Inspect brake hoses and lines
❑ Inspect drive shafts and boots
❑ Inspect exhaust system
❑ Inspect front brake disc/pads, calipers
❑ Inspect rear brake disc/pads
❑ Inspect steering gear box, linkage & boots/lower arm ball joint, upper arm ball joint
❑ Inspect suspension mounting bolts
❑ Inspect brake fluid
❑ Inspect fuel filter *2
❑ Inspect fuel lines, fuel hoses and connections
❑ Inspect fuel tank air filter *2
❑ Inspect parking brake
❑ Inspect valve clearance *3
❑ Inspect vapor hose and fuel filler cap
❑ Inspect drive belts *3 (First, 96,000 km (60,000 miles) or 72 months after that, every 24,000 km (15,000 miles) or 24 months)
❑ Inspect power steering fluid (if equipped)
❑ Inspect power steering pump, belt and hoses (if equipped)
❑ Replace climate control air filter (for evaporator and blower unit)
❑ Replace air cleaner filter
❑ Replace engine oil and filter (Every 12,000 km (7,500 miles) or 12 months)
❑ Add fuel additive *1 (Every 12,000 km (7,500 miles) or 12 months)

84,000 km (52,500 miles) or 42 months
❑ Rotate tire ❑ Inspect battery condition ❑ Inspect air cleaner filter ❑ Inspect vacuum hose ❑ Inspect power steering fluid (if equipped) ❑ Inspect power ...

108,000 km (67,500 miles) or 54 months
❑ Rotate tire ❑ Inspect battery condition ❑ Inspect air cleaner filter ❑ Inspect vacuum hose ❑ Inspect power steering fluid (if equipped) ❑ Inspect power ...

Other Information:

Input Speed Sensor Description and Operation
Description • Input speed sensor uses an electric current type hall sensor in which the current is changed by the magnetic variation. • Input speed sensor (A) and output speed ...

Field Effect Transistor (DATC) Repair procedures
Inspection 1. Turn the ignition switch ON. 2. Manually operate the control switch and measure the voltage of the blower motor. 3. Operate the control switch to raise the voltage up to high ...

Categories


Copyright © www.kisedona.com 2016-2024