Kia Sedona: Engine Mounting Components and Components Location - Engine And Transaxle Assembly - Engine Mechanical System - Kia Sedona YP Service ManualKia Sedona: Engine Mounting Components and Components Location

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Engine Mechanical System / Engine And Transaxle Assembly / Engine Mounting Components and Components Location

Components

1.Engine mounting support bracket
2.Engine mounting bracket
3.Transaxle mounting bracket
4.Roll rod bracket


Engine Room Under Cover Repair procedures
Removal Engine Room Front Under Cover 1. Remove the engine room front under cover (A). Tightening torque : 7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft) 2. Install in the reverse or ...

Engine Mounting Repair procedures
Removal and Installation Engine Mounting Bracket 1. Disconnect the battery negative terminal. 2. Install the jack to the edge of the lower oil pan (A) to support the engine. &n ...

Other Information:

Disc Brakes and Pads Repair procedures
Inspection Check the pads for excessive wear, discs for run out and wear, and calipers for fluid leakage. Front Brake Front brake disc thickness check 1. Check the brake pads for wear and fad ...

Warning indicator
Warning message Master warning light When the LDWS is not working properly, the warning light will illuminate and the warning message will come on for a few second. After the message disappear ...

Categories


Copyright В© www.kisedona.com 2016-2024