Kia Sedona: Oil Level Gauge & Pipe Components and Components Location - Lubrication System - Engine Mechanical System - Kia Sedona YP Service ManualKia Sedona: Oil Level Gauge & Pipe Components and Components Location

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Engine Mechanical System / Lubrication System / Oil Level Gauge & Pipe Components and Components Location

Components

1. Oil level gauge
2. Oil level gauge pipe
3. O-ring

Oil Pressure Switch Repair procedures
Removal and Installation 1. Remove the air duct. (Refer to Intake And Exhaust System - "Air Cleaner") 2. Remove the battery. (Refer to Engine Electrical System - "Battery") 3. Remove th ...

Oil Level Gauge & Pipe Repair procedures
Removal and Installation 1. Remove the oil level gauge rod (A) and the oil level gauge (B). Tightening torque: 18.6 ~ 22.6 N.m (1.9 ~ 2.3 kgf.m, 13.7 ~ 16.6 lb-ft)     ...

Other Information:

Weight of the trailer tongue
The tongue load of any trailer is an important weight to measure because it affects the total gross vehicle weight (GVW) of your vehicle. This weight includes the curb weight of the vehicle, any ...

Fuel Tank Air Filter Repair procedures
Removal 1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal. 2. Lift the vehicle. 3. Disconnect the canister close valve connector (A). 4. Disconnect th ...

Categories


Copyright В© www.kisedona.com 2016-2024