Replacement |
[Front] |
1. |
Remove the sunroof assembly.
(Refer to Sunroof - "Sunroof Assembly") |
2. |
Loosen the mounting screws and remove the sunshade stoper (A). |
3. |
Loosen the nuts and remove the drain channel (A). |
4. |
Remove the sunshade (A) in the direction of the arrow. |
5. |
Install in the reverse order of removal. |
[Rear] |
1. |
Remove the sunroof assembly.
(Refer to Sunroof - "Sunroof Assembly") |
2. |
Loosen the mounting screws and remove the sunshade stoper (A). |
3. |
Remove the sunshade (A) in the direction of the arrow. |
4. |
Install in the reverse order of removal. |
Injector Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the injector connector.
3.
Measure resistance between the injector terminals 1 and 2.
4.
Check that the resistance is within t ...
IMS Control Switch Components and Components Location
Components
...