Replacement |
[Front] |
1. |
Remove the sunroof assembly.
(Refer to Sunroof - "Sunroof Assembly") |
2. |
Remove the sunroof glass.
(Refer to Sunroof - "Sunroof Glass ") |
3. |
Remove the sunroof motor.
(Refer to dy Electrical System - "Sunroof Motor ")
|
4. |
Loosen the screw and remove the guide cover (A). |
5. |
Remove the mechanism (A) by pushing in the direction of the arrow. |
6. |
Install in the reverse order of removal. |
[Rear] |
1. |
Remove the sunroof glass.
(Refer to Sunroof - "Sunroof Glass ") |
2. |
Completely open the sunroof glass by pressing the sunroof switch. |
3. |
Fix the mechanism by pulling the front part (A) in the direction of the arrow. |
4. |
Completely open the sunroof glass by pressing the sunroof switch. |
5. |
Remove the mechanism (A) by pushing in the direction of the arrow. |
6. |
Install in the reverse order of removal. |
Vehicle certification label
The vehicle certification label attached on the driver ...
Barometric Pressure Sensor (BPS) Description and Operation
Description
Barometric Pressure Sensor (BPS) is a speed-density type
sensor and is installed on the air cleaner assemby. It senses absolute
pressure of the air cleaner assemby and transfers the ...