Kia Sedona: Rear Evaporator Core Repair procedures - Rear Heater - Heating,Ventilation And Air Conditioning - Kia Sedona YP Service ManualKia Sedona: Rear Evaporator Core Repair procedures

Third generation YP (2014-2025) / Kia Sedona YP Service Manual / Heating,Ventilation And Air Conditioning / Rear Heater / Rear Evaporator Core Repair procedures

Replacement
1.
Remove the rear heater & A/C unit.
(Refer to Rear Heater - "Rear Heater Unit")
2.
Remove the rear heater & A/C lower case after loosening the screws.

3.
Remove the rear refrigerant line clip (A) after loosening the screw.

4.
Remove the rear evaporator core (A).

5.
Install in the reverse order of removal.
Rear Heater Core Repair procedures
Replacement 1. Disconnect the battery negative terminal. 2. When the engine is cool, drain the engine coolant from the radiator. (Refer to Engine Mechanical System - “Coolant”) 3. Rem ...

Rear Blower Motor Repair procedures
Inspection 1. Connect the battery voltage and check the blower motor rotation. 2. If the blower motor does not operate well, substitute with a known-good blower motor and check for proper oper ...

Other Information:

Delivery Pipe Repair procedures
Removal     When removing the high pressure fuel pump, high pressure fuel pipe, delivery pipe, and injector, injury may be caused by leakage of high pressure fuel. For ...

Specifications
Specifications Automatic Transaxle ItemSpecificationTransaxle modelA6LF2Engine modelGasoline 3.3 GDITorque converter type3-element, 1-stage, 2-phase typeTorque converter sizeØ260mm (10.2362 in. ...

Categories


Copyright © www.kisedona.com 2016-2025