Kia Sedona: Audio Unit Repair procedures

Third generation YP (2014-2025) / Kia Sedona YP Service Manual / Body Electrical System / Audio / Audio Unit Repair procedures

Removal

1.	Disconnect the negative (-) battery terminal.

2.	Remove the center fascia upper panel. (Refer to Body - "Center Fascia Panel")

3.	Remove the audio head unit (A) after loosening the screws.

Remove the audio head unit after disconnecting the connectors and cable (A).

When the compact disc cannot be ejected, do not pull it out by force.

Installation

1.	Connect the audio unit connectors and cable.

2.	Install the audio head unit.

3.	Install the center fascia upper panel.

Connect the negative (-) battery terminal.

•	Make sure that the connectors are connected properly.

•	Check the audio system.

Audio Unit Components and Components Location

Components Connector Pin Information No.Connector AConnector B1Rear left speaker (+)CAN High2Front left speaker (+)-3Front right speaker (+)-4Rear right speaker (+)-5--6-USB D (+)7-USB VDD8Illum ...

Speakers Repair procedures

Inspection 1. Troubleshooting for Speaker (1) Basic inspection of speaker Inspect the sound from speaker after verifying that the speaker mounting screws are removed and the wiring connector ...

Other Information:

Blower Unit Components and Components Location
Components Location 1. Blower Unit Components 1. Inlet Seal2. Intake Actuator3. Antinoise Pad4. Blower Upper Case5. Blower Lower Case6. Blower Motor7. Inlet Duct Upper Case8. Inlet Door As ...

Dynamic Damper Repair procedures
Removal 1. Remove the front driveshaft. (Refer to Driveshaft Assembly - “Front Driveshaft”) 2. Remove the TJ joint assembly. (Refer to Driveshaft Assembly - “TJ Joint”) 3. Remo ...

Kia Sedona: Audio Unit Repair procedures

Audio Unit Components and Components Location

Speakers Repair procedures

Other Information:

Categories