Components |
No. | Connector A | No. | Connector B |
1 | GND | 1 | Driver mirror holizontal_output |
2 | Mirror sensor GND_output | 2 | Driver mirror verticall_output |
3 | Driver unlock state_Input | 3 | Mirror folding_output |
4 | Driver key lock switch_input | 4 | Mirror unfolding_output |
5 | Driver key unlock switch_input | 5 | Driver door unlock_output |
6 | SET switch_input | 6 | Driver door lock_output |
7 | IMS switch1_input | 7 | Battery (+) mirror control |
8 | IMS switch2_input | 8 | - |
9 | Body-CAN (High) | 9 | GND Power |
10 | Body-CAN (Low) | 10 | Mirror common_output |
11 | Mirror sensor power_output | 11 | Driver mirror heater_output |
12 | - | 12 | Battery (+) |
13 | Driver door open switch_input | 13 | IGN1 |
14 | Rear driver auto_output (Safety) | 14 | Mirror horizontal sensor_input |
15 | Rear driver window (Down)_output (Safety) | 15 | Mirror vertical sensor_input |
16 | Rear driver window (Up)_output (Safety) | 16 | Battery (+) power |
17 | Window lock_output | 17 | Front driver window (Up)_output |
18 | Front driver auto_output (Safety) | 18 | Front driver window (Down)_output |
19 | Front driver window (Down)_output (Safety) | гЂЂ | |
20 | Front driver window (Up)_output (Safety) | ||
21 | Safety power window enable_output | ||
22 | Tail lamp_output | ||
23 | Pocket lamp_output | ||
24 | Window lock_output 2 | ||
25 | Front assist window (Up)_output (Safety) | ||
26 | Front assist window (Down)_output (Safety) | ||
27 | Front assist auto_output (Safety) | ||
28 | Rear assist window (Up)_output (Safety) | ||
29 | Rear assist window (Down)_output (Safety) | ||
30 | Rear assist auto_output (Safety) | ||
31 | - | ||
32 | - |
Fluid Repair procedures
Inspection
Automatic Transaxle Fluid (ATF) Level Check
When checking the ATF level, be careful not to allow foreign substance (like dust) to enter through the filler ...
Windshield Deicer Switch Repair procedures
Inspection
1.
The windshield deicer switch inputs can be checked using the GDS.
2.
To check the input value of windshield deicer switch, select option "Body Control Module".
3.
Select opti ...